快捷搜索:  as  1111

B11. Control Variable View-3 & B12. Economic Function View-1

提示

High Limit 应该 >= Low Limit;

SETRANGE LOW≤SETRANGE HIGH

SETPOINT LOW ≤ SETPOINT HIGH

SETRANGE LOW≥SETPOINT LOW

SETRANGE HIGH ≤ SETPOINT HIGH

假如SET VALUE TYPE(设定值类型)是SET PNT,则只有“SET RANGE HIGH”可编辑,且“SET RANGE HIGH”的值自动复制到“SET RANGE LOW”。

从R3.06起,CV设定范围有四种类型,Set Range – Zone Control(设定范围-区域节制),Set Point – Setpoint Control(设定点-设定点节制),Low Limit Zone Control(低限区域节制),在CV上只有下限(无上限)和High Limit Zone control(高限区域节制)只有高限(无低限)。在DEF文件中为每个CV定义了SETVALUETYPE。

纵然为每个限定分配了位号名,也会履行上述差错反省。检测履新错时,数据变为Bad。(R4.02)

**为了将Online Tuning Weight(在线整定权重)反应到节制器,应从节制面板触发在线整定。然后鄙人一个履行周期获得改动。

B12经济函数视图

Economic Function (EF)(经济函数)参数显示在Economic Function(经济函数)面板上。可以在PCTP离线定义多个经济函数。在此面板上,操作员可以选择经济函数并输入节制器的EF参数。

经济函数面板有“ENG”和“OPE”两种操作模式。以下是ENG模式的窗口。

查看

Figure B2.2.9.1 Items/Parameters under EF Panel ENG MODE图B2.2.9.1 EF面板ENG模式下的条款/参数

条款阐明

各个必要由操作员和工程师输入的条款/参数如下。

|条款|描述|操作员模式| 工程师模式|

| ------------- |:-------------:| -----:|

|Common(通用)|

|Tracking Filter(跟踪滤波)|确定跟踪滤波常数。非负值为可用的,单位是秒。|R|R/W|

|Economic Function Value(经济函数值) | 所选经济函数的谋略值。|R|R|

|Optimal Value(最优值)|表示EF在优化时代实现的最佳可能值。为稳态谋略值(猜测时域终点)。|R|R|

|Economic Function Selection(经济函数选择)|表示所选的经济函数条款。| R|R|

|Status(状态)|唆使所选经济函数的状态。 ACTIVE INACTIVE BAD|R|R|

|EF Common(EF通用)|

|Economic Function Selection(经济函数选择)|表示所选的经济函数的条款。| R/W |R/W|

|Function Name(函数名)|经济函数的独一位号名。 |R| R|

|Comments(注释)|EF位号注释。|R|R|

|Economic Coefficients(经济系数)|

|Coefficient Name(系数名)| 经济系数的独一位号名。|R|R|

|Comment(注释)|经济系数注释。|R|R|

|Value (值)|经济系数值(Z_Coefficient)。| R/W |R/W|

|Button(按钮)|

|Apply Button(利用按钮)|如前所述。|R/W |R/W|

|Undo Button(撤销按钮)|在单击Apply按钮之前取消新输入的参数。然后上一个参数显示为玄色。|R/W |R/W|

原文:

TIPS

High Limit should be >= Low Limit

SETRANGE LOW≤SETRANGE HIGH

SETPOINT LOW ≤ SETPOINT HIGH

SETRANGE LOW≥SETPOINT LOW

SETRANGE HIGH ≤ SETPOINT HIGH

If the “SET VALUE TYPE is SET PNT then only “SET RANGE HIGH” is editable and value of “SET RANGE HIGH” is copied to “SET RANGE LOW” automatically.

From R3.06, there are 4 type of CV set range, Set Range – Zone Control, Set Point – Setpoint Control, Low Limit Zone Control with only low limit (no high limit) on CV, and High Limit Zone control with only high limit (no low limit) on CV. SETVALUETYPE is defined in the DEF file for each CV.

The above error check is also done even when the tag name is assigned to each limit. The data becomes Bad when the error is detected. (R4.02)

** In order to reflect Online Tuning Weight to the controller, Online tuning should be triggered from the control panel. Then the modification is reflected at the next execution period.

B12. Economic Function View

Parameters of Economic Function (EF) are displayed on the Economic Function Panel. Multiple Economic functions can be defined on PCTP offline. On this panel, operators can select the economic function and enters the EF parameters for the controller.

Economic Function Panel has two modes of operation, “ENG” and “OPE”. Following are the windows for the ENG modes.

View

Description of items

Various items/parameters need to be entered by operator and engineers are described below.

| Item|Description |Operator mode|Engineer mode|

| ------------- |:-------------:| -----:|

| Common|

| Tracking Filter| Determines the Tracking Filter Constant. Non-negative value is available. Unit is second.|R |R/W|

| Economic Function Value|Calculated value of the selected Economic Function. | R|R|

| Optimal Value|Value indicates the EF’s best possible value to achieve during optimization. Value is calculated for steady state (end of the prediction Horizon)|R|R|

| Economic Function Selection|Indicates the selected Economic Function Index.|R| R|

| Status| Indicates the status of the selected economic function. ACTIVE INACTIVE BAD|R|R|

| EF Common|

| Economic Function Selection| Indicates the selected Economic Function Index.| R/W|R/W|

| Function Name | Unique Tag Name of the Economic Function|R| R|

| Comments |EF Tag comments|R| R|

| Economic Coefficients|

| Coefficient Name|Unique Tag Name of Economic Coefficient|R| R|

| CommentEconomic Coefficient Comments|R| R|

| Value| Economic Coefficient Value (Z_Coefficient) |R/W|R/W|

| Button|

| Apply Button|As Explained Earlier|R/W|R/W|

| Undo Button|Cancel a newly entered parameter before the “Apply” button is clicked. Then previous parameter is displayed in black.| R/W|R/W|

2017.1.8

您可能还会对下面的文章感兴趣: